The process is very fast and dry. The dry ice disappears on contact and can be performed on-line without disassembly and without need for drying time.
Critical process cleaning to automative manufacturing industry
Regular maintenance of automated production equipment increases the volume and quality required from manufacturing industries. To that end it is essential that a bespoke integrated cleaning and preventative maintenance program is in place and monitored, to extend the life and service of your assets.
Difficult contaminants produced during production could be, but not limited to, Grease, Carbon, Weld slag, Weld spatter, Resin, Glue and chemicals.
All of the above if not regularly removed will build up in and around automated equipment damageing wrist axis joints, clamps and grippers, locating pins and part present sensors and when the equipment fails your very expensive technician will have to remove the build up of slag/dirt before any repair work can be completed. (extended equipment down time).
All automated equipment benefits from a “NO CONTACT CLEANING SYSTEM”.
Lightweight materials used to manufacture Gun Heads, Grippers, and Tooling Stations are damaged by traditional methods of Slag and Debris removal. Dry Ice provides for the removal of problem causing contaminants without damage to the equipment.
Dry Ice Cleaning eliminates scraping, chiseling, hammering, and the use of toxic chemical cleaners.
Efficiency is increased due to Grippers, Welding guns, locating pins and tooling stations working as if new, also as and when break downs occur, engineers can isolate and repair defective equipment quickly without having to remove difficult weld slag.
Dry Ice Blasting uses Dry Ice Pellets made from the same substance used to carbonate beverages. This method does not generate secondary waste as does sand, soda, water, or grit cleaning. Dry Ice Blasting also replaces chemical and solvent based cleaning.
This versatile process cleans heavy buildup without damage to sensitive areas like electrical components, switches, wiring, photo electric sensors, and more.
Since Dry Ice Pellets manage to reach every nook and corner of the equipment it cleans more deeply and effectively.
Dry Ice Blasting is completely dry, non-abrasive, non-toxic and non-corrosive . It quickly removes most contaminants without damage to switches, panels, lines, tubes, wiring or belts, HVAC equipment and is safe to use on electrical.
The process is very fast and dry. The dry ice disappears on contact and can be performed on-line without disassembly and without need for drying time.
We provide detailed insight into the benefit of cleaning with dry ice for the many industries
where dry ice is the preferred cleaning method.
Ask our website assistant or contact our team.
